• FF Finishing Film (Siliziumkarbid)

1A-FF Finishing Film (Silicon Carbide)

….. is a with concentrated silicon carbide abrasives precision coated, water resistant and tough polyester film. The bonding of the abrasive particle provides flexibility and a steady hold on the film substrate. The resin bond between the particles and the film ensures an absolute permanent and consistent processing of the surface. Our 1A-Finishing Film (SiC) offers a repeatable and precise finish on hard and soft surfaces and provides an aggressive grinding pattern.

Application

  • material: rubber, plastic, glass, stone, wood, metal, non-ferrous metal, composite, plexiglass
  • work piece::rubber rollers, plastic rollers, teflon rollers, lacquer parts, wooden parts
  • Industries: roller manufacturer, roller coating service, automobile industry, print- and paper industry, instrument manufacturer, furniture industry, stone industry

 spezification

Grit sizes µm 9 15 20 30 40 60 80
Abrasives silicon carbide - electrostatically spread
  • Rolls
  • Sheets
  • Discs
  • 1A-FF SiC Rollen

    1A – FF (SiC) Rolls

    1A-FF (SiC) is a roll, available in grit sizes from 9 - 80µm.
    The standard core has an inside diameter of 76,2mm and 4 notches. The standard widths are 100/50mm – other widths between 8–205mm could be also supplied on customer requirements.

    Our 1A – Finishing Films (SiC) should be generally used in combination with common cooling lubricants or with water.

    backing material polyester foil (4Mil = 100µm)
    backside with anti-slipping-backing (ARB)
    dimensions

    standard 100mm x 50m
    other sizes according to customers specification
    abrasive side outside (standard) | inside also possible
    core 3 inch with notches or 1 inch
  • 1A-FF SiC Sheets

    1A – FF (SiC) Sheets

    1A – FF (SiC) is available as a sheet, in grit sizes from 9 - 80µm. The standard dimension is 230mm x 280mm, could be also supplied in other dimensions on customer requirements.  Our 1A – FF (SiC) sheets are fine grinding tools, to reach precise surfaces on extremly hard and hardened materials. Sheets are mostly used on lapping machines or for manual operations.

    Our 1A – Finishing Films (SiC) should be generally used in combination with common cooling lubricants or with water.

    backing material polyester foil (4Mil = 100µm)
    backside self adhesive | not self adhesive
    dimensions

    standard 230mm x 280mm
    other size according to customers specification
  • 1A-FF SiC Discs

    1A – FF (SiC) Discs

    1A – FF (SiC) is available as a disc as well, in grit sizes from 9 - 80µm. The standard dimension is ø 102/127/205/305mm, could be also supplied in other dimensions on customer requirements.  Our 1A-FF (SiC) Discs are fine grinding tools, to reach precise surfaces on extremly hard and hardened materials. Discs are mostly used on lapping machines or for manual operations.

    Our 1A – Finishing Films (SiC) should be generally used in combination with common cooling lubricants or with water.

    backing material polyester foil (4Mil = 100µm)
    backside self adhesive | not self adhesive
    dimensions

    from ø 102mm - ø 305mm
    other size according to customers specification